Size 5.247 MB 4 seeders Added 2012-12-06 09:33:24
First off, you're probably wondering whether this RB wad updating tool is for PAL or NTSC. The answer is simple. Both. Now to the good stuff. I created my own custom batch file (UPDATE.BAT), similar to "--- StartMenu ---.bat" that you might find in other RB3 DLC tools, however it's much simpler. Now there is only 1 batch file, instead of having 1 in every generation's folder. Secondly, it does some simple checks, such as: 1. Checks if an older wad exists and if so then 2. Makes sure the newer wad is not the same as the older wad To update a wad follow these steps: 1. Run UPDATE.BAT 2. Type either 1 for NTSC or 2 for PAL and press Enter/Return key. 3. Type the generation's number (anywhere from 1 and 10) and press the Enter/Return key. 4. Wait while the applications run. 5. Once you are back at a menu, read and determine whether the wad was updated or not 6. Press any key to return to the wad menu. 7. Repeat step 3-7 as needed. If you are having any problems or appreciate the tools, then feel free to leave a comment.
|Rock Band 3 DLC Gen 1-10 tools/resources/common-key||16 B|
|Rock Band 3 DLC Gen 1-10 tools/resources/cygcrypto-0.9.8.dll||1.084 MB|
|Rock Band 3 DLC Gen 1-10 tools/resources/cygwin1.dll||1.873 MB|